SET Series Double-Srew Extruding Granulator
Features:
SET Type Double-Screw Granulator has two models of front and side for material to be extrude out. Diameters of granular product granulated by front model may be normally selected between 1.5mm-12mm, and by side model can be normally selected between 0.7mm-2.0mm.Granules are cylindrically shaped. The rate of end product is equal to more than 95%.
Description:
In the dispersed system of coexistent composition of solid power and liquid, besides with solid phase on the former, make use of the self cohesiveness of the dispersed system (or add binder) to make basic partials of solid powder bind each other and increase to form mass granule with uniform fair-size by means of exerting force) such as extruding force, gravity, centrifugal force, impulsive force, gravity, centrifugal force, mechanical force, impulsive force air flowed. Complete sets of equipment for wet granulation mainly consist of equipment for mixing,granulating,dry in and auxiliary system. Powder material being mixed is delivered into granulator sideband then to get end granular product through drying ,thus achieving the goal of granulation.
Tec hn ical parameters:
model The screw diameter The motor power kw Speed rpm Overall dimensions
L×D×H mm Equipment weight kg
SET-100 100 7.5 11~110 2000×500×1000 810
SET-140 140 15 11~110 1920×800×1430 810
SET-180 180 22 11~110 3000×870×880 810
Products center
Dryer Series
- Flash dryer series
- Vacuum dryer series
- Belt dryer series
- Special oven series
- Air dryer series
- Fluidized bed dryer series
- Boiling dryer series
- Spray dryer series
- Sludge dryer series
- Disc dryer series
Mixer Series
Grinder Series
Screening series
Granulator series
Heat source series
Auxiliary Series
Contact:Wu Yaohong (General Manager)
Phone:13861037227
Tel:0519-88908708
Fax:0519-88910209
Email:office@ounadry.com
Address:Chajiawan , Jiao xi zhen, Changzhou, Jiangsu province ,China