Features：

1、Particle intensity can be adjusted. Regulate the Pressure of rollers to control intensity of product．

2、Operating in cycles, working continuously．

3、High product output, output of one machine can be more than 2000kg/h. (Heap Intensity 1.5×103kg/m3)

Principle：

Power materials pass the vibrating material delivery bucket, after quantity fixed by cross spiral material convyor. Evenly enter main rolling flake material bucket. So quantity of materials in material bucket keep constant. After powder materials are precompressed by the longitudinal cone spiral in the main flake bucket. they Will be sent to inlets of two curve slots. Half oblate slots of rhomb slots or rhomb slots evenly separate on surface of two rollers. By way of meshing and transmission of a couple of gears, two rollers reverse rotation with one speed. So materials are bitten into the slots and forced to be compressed in a tank. After materials being compressed and forming. the pressure on them gradually reduce. Materials drop by elasticity and gravity from the slots. Enter the Broken Granulating System. There they are screened and graded according to consumer, require of particles size Finally you get regular particle product conforming to quality standard. Rest of screened powder can return to vibrating bucket to be used again．

Tec hn ical parameters：

Model/project GFZL-1 GFZL-2 GFZL-3 GFZL-4 GFZL-5

Roll diameter mm φ240 φ240 φ300 φ360 φ480

Effective use roll width mm 80 160 250 360 480

Roll speed rpm 8-20 8-20 8-20 8-20 8-20

The maximum forming pressure t 50 60 80 100 130

mm 4 5 6 8 8

Roll the maximum thicknesskg/h 250-500 500-900 700-2000 1000-1400 2000-7400

Finished product granularity mm 0.2-5 0.2-5 0.2-8 0.2-8 0.2-8

The finished production kg/h 80-150 150-300 300-600 600-1000 1000-2000

The host power kw 7.5 11 15 22 30

The total power kw 13 21 30 46 60

Dimension length x width x

 high mm 1500×2000×3800 1700×2000×4000 2000×2500×4200 2500×2500×5200 2800×2600×6000

The weight of the t 7 8 10 14 20

Note: 1, flaking production to material density of 1500 kg/m3, roll speed 20 RPM calculation. 2, production of finished products to set up the amount 50% computation. 3, finished product size by changing the crushing granulation machine of the sieve plate can be adjusted in a larger scope. 4, the host used 70% of the actual power for the selected motor power. 5, roll speed by changing the pulley drive between motor and reducer to adjust.