Microparticle Pulverizer

Working Principle

Materials in the feed hopper are sent into the grinding chamber by a spiral conveyor, and then cut and smashed by the high speed rotary blade. Then the materials are sent into a cyclone separator by negative-pressure conveying, and discharged out of the grinder. The dust produced in the grinding work is filtered by the filter cylinder and then recycled. In the whole production process, there is no flying dust, which greatly improves the utilization rate of materials.

Features

1. Our WFJ series microparticle pulverizer consists of three parts: a main machine, an auxiliary machine, and an electric control unit. It is compact in design and reasonable in structure. It has winnowing capability, no sieve or mesh. 

2. Equipped with a grading device inside the machine, this grinding machine could complete grinding and grading at one time.

3. Negative-pressure conveying system could constantly exhaust the heat in the pulverizer produced by the grinding work, so our microparticle pulverizer is also suitable for thermal sensitive materials.

Technical Parameters of Microparticle Pulverizer

Model Production Capacity (kg/h) Material Granularity (mm) Discharge Granularity (mesh) Total Power (kw) Rotating Speed of main motor (r/min) Outside Dimension (m) Weight (kg)

WFJ-15 10-100 <=10 60-450 13.5 5800 4.2×1.2×2.7 1000

WFJ-20 50-250 <=10 60-450 19.3 5200 4.3×1.4×2.7 1500

WFJ-36 80-500 <=10 60-450 39.5 500 7.9×1.5×3.3 2500

WFJ-60 200-1000 <=10 60-450 75.3 4500 9.5×1.8×3.7 3200